Beskrivelse
RUTXR1 er en rack montérbar Advanced (LTE-A) router som er udstyret med 5 stk Gigabit Ethernet porte, Wifi, Dual-SIM, USB port, Console port, redundant strømforsyning, SFP port og RutOS software for advancerede netværks løsninger.
Specifikationer
MOBILE | ||
Radiomodul | 4G (LTE) – Cat 6 op til 300 Mbps, 3 – op til 42 Mbps | |
SIM switch | 2 SIM kort, et for hvert radiomodul, auto switch muligheder: svagt signal, data begrænsning, SMS begrænsning, roaming, intet netværk, forbindelse nægtet, data forbindelse fejler, SIM idle beskyttelse (planlagt) | |
Status | Signal styrke, SINR, RSRP, RSRQ, Bytes sendt/modtaget | |
SMS | SMS status, SMS konfiguration, send/læs SMS via HTTP POST/GET, Email til SMS, SMS til Email, SMS til TTP, SMS til SMS, SMS auto reply, skeduleret SMS (planlagt), SMPP (planlagt) | |
Black/White list (planlagt) | Operatør black/white list | |
Multiple PDN | Possibility to use different PDNs for multiple network access and services | |
Band management | Band lock, Used band status display | |
APN | Auto APN | |
Bridge mode | Direct connection (bridge) between mobile ISP and device on LAN | |
WIRELESS | ||
Wireless mode | 802.11ac (WiFi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA) | |
Wifi sikkerhed | WPA2-Enterprise-PEAP, WPA2-PSK, WPA-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation | |
ESSID | ESSID stealth mode | |
Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, built in customizable landing page | |
ETHERNET | ||
WAN | 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover | |
Fiber | 1 x SFP port (cannot work simultaneously with Ethernet WAN port) | |
LAN | 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX | |
CONSOLE | ||
Console | RS-232 (RJ45) console port for router configuration and debuging | |
NETVÆRK | ||
Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP) | |
Netværksprotokoller | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, UPNP, SSH, DHCP, Telnet, SNMP, MQTT, Wake on LAN (WOL) | |
VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets | |
Connection monitoring | Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection | |
Firewall | Port forwards, traffic rules, custom rules | |
DHCP | Static and dynamic IP allocation, DHCP Relay, Relayd | |
QoS | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e | |
DDNS | Supported >25 service providers, others can be configured manually | |
Network backup | VRRP, Mobile, Wired, Fiber and WiFi WAN options, each of which can be used as an automatic Failover | |
Load balancing | Balance Internet traffic over multiple WAN connections | |
SSHFS (optional) | Possibility to mount remote file system via SSH protocol (not available in standard FW) | |
SECURITY | ||
Authentication | Pre-shared key, digital certificates, X.509 certificates | |
Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T | |
Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) | |
VLAN | Port based and tag based VLAN separation | |
Mobile quota control | Custom data limits for both SIM cards | |
WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only | |
Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter | |
OpenVPN | Multiple clients and a server can run simultaneously, 12 encryption methods | |
OpenVPN | Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC | |
IPsec | IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256) | |
GRE | GRE tunnel | |
PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3 support | |
Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code | |
DMVPN | Method of building scalable IPsec VPNs | |
SSTP | SSTP client instance support | |
MODBUS | ||
MODBUS TCP SLAVE | ||
ID filtering | Respond to one ID in range [1;255] or any | |
Allow remote access | Allow access through WAN | |
Custom registers | Modbus TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend Modbus TCP slave functionality | |
MODBUS TCP MASTER | ||
Supported functions | 01, 02, 03, 04, 05, 06, 15, 16 | |
Supported data formats | 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC) | |
MODBUS | RTU MASTER (RS232) (PLANNED) | |
Supported baud rates | From 300 to 115200 | |
Supported functions | 01, 02, 03, 04, 05 (only for alarms), 06 (only for alarms), 15 (only for alarms), 16 (only for alarms) | |
Number of data bits | From 5 to 8 | |
Number of stop bits | 1 or 2 | |
Parity | None, Even, Odd | |
Flow | None, RTS/CTS, Xon/Xoff | |
MQTT GATEWAY | ||
Gateway | Allows sending commands and receiving data from Modbus Master trough MQTT broker | |
MODBUS DATA TO SERVER | ||
Protocols | HTTP(S), MQTT, Azure MQTT (planned) | |
MONITORING & MANAGEMENT | ||
WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log | |
FOTA | Firmware update from server, automatic notification | |
SSH | SSH (v1, v2) | |
SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET | |
Call | Reboot, Status, Mobile data on/off, Output on/off | |
TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem | |
MQTT | MQTT Broker, MQTT publisher | |
SNMP | SNMP (v1, v2, v3), SNMP Trap | |
JSON-RPC | Management API over HTTP/HTTPS | |
Modbus | Modbus TCP status/control | |
RMS | Teltonika Remote Management Systems (RMS) | |
IoT PLATFORMS | ||
Clouds of things | Allows monitoring of: Device data, Mobile data, Network info, Availability | |
ThingWorx | Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type | |
Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP | |
Azure IoT Hub | Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server | |
SYSTEM CHARACTERISTICS | ||
CPU | Quad-core ARM Cortex A7, 717 MHz | |
RAM | 256 MB, DDR3 | |
FLASH storage | 256 MB SPI Flash | |
FIRMWARE/CONFIGURATION | ||
WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup | |
FOTA | Update FW/configuration from server | |
RMS | Update FW/configuration for multiple devices at once | |
Keep settings | Update FW without losing current configuration | |
FIRMWARE CUSTOMIZATION | ||
Operating system | RutOS (OpenWrt based Linux OS) | |
Supported languages | Busybox shell, Lua, C, C++ | |
Development tools | SDK package with build environment provided | |
SERIAL | ||
RS232 | RJ45 connector, full RS232 (with RTS, CTS) | |
Serial functions | Console (active by default), Modbus gateway (planned), Modbus RTU master (planned), Serial OverIP (planned), Modem mode (Full or partial) (planned), Ntrip client (planned) | |
USB | ||
Data rate | USB 2.0 | |
Applications | Samba share, custom scripts (planned) | |
External devices | Possibility to connect external HDD, flash drive, additional modem, printer | |
Storage formats | FAT, FAT32, NTFS | |
POWER | ||
Connector | 2 x 4 pin industrial DC power sockets for main and redundancy power sources | |
Input voltage range | 9 – 50 VDC, reverse polarity protection, voltage surge/transient protection | |
Power consumption | idle: <3W, max: 18W | |
FYSISKE INTERFACES | ||
Ethernet | 5 x RJ45 porte, 10/100/1000 Mbps | |
Console | 1 x RJ45, RS232 communication | |
Fiber | 1 x SFP port | |
Status LEDs | 2 x WAN type, 2 x Mobile connection type, 3 x Mobile signal strength, 2 x active SIM, 10 x Ethernet status, 2 x Console status (RX – yellow, TX – green), 2 x Power | |
SIM | 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders | |
Power | 2 x 4 pin DC connector | |
Antenner | 2 x SMA for LTE, 2 x RP-SMA for Wifi | |
USB | USB A port for external devices | |
Reset | Reboot/User default reset/Factory reset button | |
Øvrige | Grounding screw, lock | |
FYSISKE SPECIFIKATIONER | ||
Kabinet | Metal | |
Dimensioner (B x H x D) | 272 x 42.6 x 122.6 mm | |
Vægt | 1050 g | |
Monteringsmuligheder | Rack montage eller placering på fladt underlag | |
DRIFTSMILJØ | ||
Driftstemperatur | -40°C til +70°C | |
Luftfugtighed (drift) | 10 % til 90 % ikke-kondenserende |
Download datablad her.